The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Cali 3 Cali 1100 1994-1997 Brakes

Sort by Title

Sort by Price

Page 6 of 8

1 2 3 4 5 6 7 8

Brake Disc Mounting Bobbin

BRA28610 Fits Cali 3, Le Mans 1000

Dimensions:
10.7mm x 22mm OD on section that locates in disc

Stainless steel brake disc mounting bobbin

part in stock 5 in stock

28613560 GU28613560 28 61 35 60
2861 3560 2861.3560 28.61.35.60

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Lever Rubber PS13 & PS16

BRA10040 Fits Cali 3, Cali 1100 (1994-1997), Cali Jackal, Cali EV, Cali Stone, Nevada 750 (1998-2003), Spada 3, Quota 1100, Nevada 350, V11 Sport, 1100 Sport, Centauro

Cover rubber for PS 13 and PS 16 brake master cylinder lever

Brembo ref. 110353040

This part is available by special order, request a quote

27663615 GU27663615 27 66 36 15
2766 3615 2766.3615 27.66.36.15

£10.40

INC VAT

£8.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Master Cylinder Cap and Seal PS15 Brembo

BRA14101 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75 (4 valves per cylinder), Nevada 750, 850T, V7 Sport, 750S, S3

Dimensions:
58mm OD

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

Sorry this part is no longer available Sorry, this part is no longer available.

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

this part is no longer available
Sorry this item is out of production

Brake Fluid Pipe Black 49cm

BRA00011 Universal Part

Dimensions:
49cm x 5mm x 8mm

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£8.80

INC VAT

£7.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Single Banjo Bolt M10 Stainless Steel Kit Fine Thread

BRA01001 Universal Part

Dimensions:
M10 x 1

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

part in stock 2 in stock

95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

£8.40

INC VAT

£7.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 500ml DOT 4

BRA99002 Universal Part

Dimensions:
500ml

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

part in stock More than 5 in stock

£7.92

INC VAT

£6.60 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Long Titanium

BRA36796 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats

Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.

Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap

part in stock More than 5 in stock

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Pivot Pin and Nut Clutch or Brake Lever

HAA10850 Fits 1100 Sport ALL, Cali 3, Cali 1100, Cali EV, Centauro, Daytona, V11 Sport, Spada 3, Nevada ALL, Quota 1100

Dimensions:
12mm pivot OD

Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts

Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

10279850 GU10279850 10 27 98 50
1027 9850 1027.9850 10.27.98.50

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clipon Rubber

BRA39801 Fits 850/1000 ALL Models, V50

Dimensions:
18mm ID at wide end

Black 45 degree rubber cap for brakeline banjo union with master cylinder

Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959

part in stock 2 in stock

39663801 GU39663801 39 66 38 01
3966 3801 3966.3801 39.66.38.01

£4.20

INC VAT

£3.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 6 of 8

1 2 3 4 5 6 7 8